Corrosion performance of high-entropy (Ho0.2Er0.2Tm0.2Yb0.2Lu0.2) 2Si2O7 environmental barrier coating material under CMAS conditions at 1500 ℃

Zhang Zhenya, Yuan Shuai, Zhu Zihao, Gao Wei, Meng Yifan, Xue Zhaolu, Xiang Tengfei, Shen Yizhou, Yan Kai, Gyawali Gobinda, Zhang Shihong

Extreme Materials ›› 2026

Extreme Materials ›› 2026 DOI: 10.1016/j.exm.2026.01.001

作者信息 +

Corrosion performance of high-entropy (Ho0.2Er0.2Tm0.2Yb0.2Lu0.2) 2Si2O7 environmental barrier coating material under CMAS conditions at 1500 ℃

Author information +
文章历史 +

Abstract

Improving the corrosion resistance of environmental barrier coatings (EBCs) to molten calcium-magnesium-aluminosilicate (CMAS) salt is an urgent requirement for aeroengine blades. In this work, a novel high-entropy (Ho0.2Er0.2Tm0.2Yb0.2Lu0.2)2Si2O7 ((5RE0.2)2Si2O7) environmental barrier coating material was developed, and molten CMAS corrosion resistance of (5RE0.2)2Si2O7) was systematically investigated at 1500 °C. The prepared (5RE0.2)2Si2O7 ceramic possesses a single and stable β-phase structure with high-temperature stability from room temperature to 1500 ℃. The thermal conductivity of (5RE0.2)2Si2O7 ranges from 1.46 to 3.49 W·m−1·K-1 at room temperature to 1500 ℃. A rapid reaction of (5RE0.2)2Si2O7 with molten CMAS produced Ca2RE8(SiO4)6O2 apatite at 1500 ℃. The reaction layer thickness was only 95.9±8.6 μm which effectively inhibited the infiltration and diffusion of molten CMAS salt. In contrast, Yb2Si2O7 ceramic, when exposed to molten CMAS at 1500 ℃, showed no reaction. Instead, the molten CMAS salt penetrated into the interior of Yb2Si2O7 along grain boundaries and voids, forming bubble cracking and ultimately, structural degradation. These results suggest that the high-entropy (5RE0.2)2Si2O7 ceramic material is a potential candidate for next-generation EBC with excellent resistance to CMAS corrosion.

Key words

Environmental barrier coatings / high-entropy / thermal conductivity / Ca2RE8(SiO4)6O2 apatite / infiltration

引用本文

导出引用
Zhang Zhenya, Yuan Shuai, Zhu Zihao, . [J]. Extreme Materials. 2026 https://doi.org/10.1016/j.exm.2026.01.001
Zhang Zhenya, Yuan Shuai, Zhu Zihao, et al. Corrosion performance of high-entropy (Ho0.2Er0.2Tm0.2Yb0.2Lu0.2) 2Si2O7 environmental barrier coating material under CMAS conditions at 1500 ℃[J]. Extreme Materials. 2026 https://doi.org/10.1016/j.exm.2026.01.001

参考文献

[1]
Tejero-Martin D , Bennett C , et al. A review on environmental barrier coatings: history, current state of the art and future developments. J Eur Ceram Soc 2021, 41( 3): 1747- 1768.
[2]
Lee, KN . Yb2Si2O7 environmental barrier coatings with reduced bond coat oxidation rates via chemical modifications for long life. J Am Ceram Soc 2019, 102( 3): 1507- 1521.
[3]
Song CK , Ye F , et al. Long-term ceramic matrix composite for aeroengine. J Adv Ceram 2022, 11: 1343- 1374.
[4]
Luo YX , Sun LC , et al. Phase formation capability and compositional design of β-phase multiple rare-earth principal component disilicates. Nat Commun 2023, 14: 1275.
[5]
Ni DW , Cheng Y , et al. Advances in ultra-high temperature ceramics, composites, and coatings. J Adv Ceram 2022, 11: 1- 56.
[6]
Richards BT , Young KA , et al. Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor. Acta Mater 2016, 106: 1- 14.
[7]
Chen ZL , Tian ZL , et al. (Ho0.25Lu0.25Yb0.25Eu0.25)2SiO5 high-entropy ceramic with low thermal conductivity, tunable thermal expansion coefficient, and excellent resistance to CMAS corrosion . J Adv Ceram 2022, 11: 1279- 1293.
[8]
Zhang JG , Han GF , et al. Regulating the composition, structure, and nanoscale dimensions of Yb2Si2O7 environmental barrier coating to achieve a biomimetic teakwood-like functional structure by waste gas recycling . J Adv Ceram 2025, 14( 2): 9224021.
[9]
Dong L , Yang W-Q , Chen L , et al. Realizing the excellent oxidation resistance of an environmental barrier coating through aluminum surface modification. J Adv Ceram 2024, 13( 7): 976- 986.
[10]
Spitsberg I , Steibel J . Thermal and Environmental Barrier Coatings for SiC/SiC CMCs in Aircraft Engine Applications. Int J Appl Ceram 2010, 1.
[11]
Tian ZL , Zheng LY , et al. Theoretical and experimental determination of the major thermo-mechanical properties of RE2SiO5(RE = Tb , Dy, Ho, Er, Tm, Yb, Lu, and Y) for environmental and thermal barrier coating applications. J Eur Ceram Soc 2016, 36( 1): 189- 202.
[12]
Tian ZL , Zheng LY , et al. Exploration of the low thermal conductivities of γ-Y2Si2O7, β-Y2Si2O7, β-Yb2Si2O7, and β-Lu2Si2O7 as novel environmental barrier coating candidates. J Eur Ceram Soc 2016, 36( 11): 2813- 2823.
[13]
Zhang ZY , Xue ZL , et al. Corrosion behavior of Y xYb (2-x)Si2O7 environmental barrier coating materials against molten calcium-magnesium-aluminosilicate (CMAS) at 1475 ℃. Corros Sci, 2024,227:111770.
[14]
Lv XR , Cui JP , et al. Phase composition and property evolution of (Yb1-xHox)2Si2O7 solid solution as environmental/thermal barrier coating candidates. J Eur Ceram Soc 2022, 42( 10): 4377- 4387.
[15]
Tian ZL , Ren XM , et al. Corrosion of RE2Si2O7 (RE=Y, Yb, and Lu) environmental barrier coating materials by molten calcium-magnesium-alumino-silicate glass at high temperatures . J Eur Ceram Soc 2019, 39( 14).
[16]
Zhong X , Wang YW , et al. Effects of microstructure on corrosion behaviors for RE2SiO5 RE=Gd, Y, Er) environmental barrier coatings against calcium-magnesium-alumino-silicate melts. Corros Sci 2022, 199: 110174.
[17]
Liu XY , Zhang P , et al. Effect of lattice distortion in high-entropy RE2Si2O7and RE2SiO5 (RE=Ho , Er, Y, Yb, and Sc) on their thermal conductivity: Experimental and molecular dynamic simulation study. J Eur Ceram Soc 2023, 43( 14): 6407- 6415.
[18]
Ranganathan S . Alloyed pleasures: Multimetallic cocktails. Curr Sci India 2003, 85( 10).
[19]
Yeh Jien-Wei . and Alloy Design Strategies Future Trends in High-Entropy Alloys. JOM 2013, 65( 12): 1759- 1771.
[20]
Guo XT , Zhang YL , et al. High-entropy rare-earth disilicate (Lu0.2Yb0.2Er0.2Tm0.2Sc0.2)2Si2O7: A potential environmental barrier coating material . J Eur Ceram Soc 2022, 42( 8): 3570- 3578.
[21]
Wang X , Cheng MH , et al. Preparation and corrosion resistance of high-entropy disilicate (Y0.25Yb0.25Er0.25Sc0.25)2Si2O7 ceramics . Corros Sci 2021, 192: 109786
[22]
Chen ZY , Lin CC , et al. Investigation on improving corrosion resistance of rare earth pyrosilicates by high-entropy design with RE-doping. Corros Sci 2022, 199: 110217.
[23]
Xue ZL , Zhu Y , et al. Thermal aging and CMAS corrosion behaviors of Y2SiO5 ceramic for environmental barrier coatings . J Alloy Compd 2023,968: 172114.
[24]
Zhao ZF , Xiang HM , et al. High-entropy (Nd0.2Sm0.2Eu0.2Y0.2Yb0.2)4Al2O9 with good high temperature stability, low thermal conductivity, and anisotropic thermal expansivity . J Adv Ceram 2020, 9( 5): 595- 605.
[25]
Cong LK , Li W , et al. High-entropy (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)2Hf2O7 ceramic: a promising thermal barrier coating material . J Mater Sci Technol 2021, 101: 199- 204.
[26]
Wang X , Meng MY , et al. ( Lu1/7Yb1/7Sc1/7Er1/7Y1/7Ho1/7Dy1/7 )2Si2O7 high entropy rare-earth disilicate with low thermal conductivity and excellent resistance to CMAS corrosion. J Adv Ceram 2024, 13( 5): 549- 560.
[27]
Tan ZY , Yang ZH , et al. Mechanical properties and calcium-magnesium-alumino-silicate (CMAS) corrosion behavior of a promising Hf6Ta2O17 ceramic for thermal barrier coatings . Ceram Int 2020, 46( 16): 25242- 25248.
[28]
Sun LC , Luo YX , et al. High temperature corrosion of (Er0.25Tm0.25Yb0.25Lu0.25)2Si2O7 environmental barrier coating material subjected to water vapor and molten calcium-magnesium-alumino-silicate (CMAS) . Corros Sci 2020, 175: 108881.
[29]
Turcer LR , Padture NP . Towards multifunctional thermal environmental barrier coatings (TEBCs) based on rare-earth pyrosilicate solid-solution ceramics. Scr Mater 2018, 154: 111- 117
[30]
Turcer LR , Padture NP . Rare-earth pyrosilicate solid-solution environmental-barrier coating ceramics for resistance against attack by molten calcia-magnesia-aluminosilicate (CMAS) glass. J Mater Res 2020, 35: 2373- 2384.
[31]
Krämer S , Yang J , et al. Thermochemical interaction of thermal barrier coatings with molten CaO-MgO-Al2O3-SiO2 (CMAS) deposits . J Am Ceram Soc 2006, 89( 10): 3167- 3175.
[32]
Li H , Yu YP , et al. Calcium-magnesium-alumina-silicate (CMAS) corrosion behavior of A6B2O17 (A=Zr, Hf; B=Nb, Ta) as potential candidate for thermal barrier coating (TBC) . Corros Sci 2022, 204: 110395.
[33]
Cao G , Wang YH , et al. Tunable corrosion resistance of rare-earth monosilicate to molten calcia-magnesia-aluminosilicate glass by RE-doping strategy. Corros Sci 2022, 202: 110319.
[34]
Yue WQ , Zhao XY , et al. Structural design and CMAS corrosion resistance of high entropy RE silicate multiphase ceramics as next-generation thermal/environmental barrier coatings. J Eur Ceram Soc 2025, 45( 6): 117207
[35]
Zhi WB , Yang Wu , et al. Corrosion resistance of multicomponent disilicate (Ho0.2Er0.2Tm0.2Yb0.2Lu0.2)2Si2O7 against CMAS and volcanic ash. Corros Sci 2024, 240: 112484.
[36]
Duffy JA , Ingram MD . An interpretation of glass chemistry in terms of the optical basicity concept. J Non-Cryst Solids 1976, 21( 3): 373- 410.
[37]
Costa GCC , Jacobson NS . Mass spectrometric measurements of the silica activity in the Yb2O3-SiO2 system and implications to assess the degradation of silicate-based coatings in combustion environments. J Eur Ceram Soc 2015, 35( 15): 4259- 4267.
[38]
Tian ZL , Zhang J , et al. General trend on the phase stability and corrosion resistance of rare earth monosilicates to molten calcium magnesium aluminosilicate at 1300 . Corros Sci 2019,148: 281- 292.
[39]
Zhang YQ , Zou Bl , et al. Hot corrosion of (Yb0.5Y0.5)2Si2O7 and (Yb0.25Y0.25Er0.25Tm0.25)2Si2O7 by CMAS at 1300 °C and 1500 °C . Ceram Int 2025, in press.

脚注

The authors have no competing interests to declare that are relevant to the content of this article.

This work was supported by Anhui Provincial Natural Science Foundation (2408085JX008), China Postdoctoral Science Foundation (2024T170003), Anhui Provincial Natural Science Foundation (2308085QE135), Construction of International Surface Technology Standards for New Energy Vehicles and Integrated Circuit Industry (2023MKS01).

Reference:


Accesses

Citation

Detail

段落导航
相关文章

/