The advancement of cutting-edge technologies, including hypersonic vehicles, aerospace transportation platforms, and fusion energy systems, is driving the transition in electromagnetic stealth requirements from room-temperature conditions to extreme environments. However, traditional wave-absorbing materials suffer severe performance degradation at temperatures above 500 °C or under corrosive and irradiated conditions. Owing to their unique thermodynamic stability and tunable multi-element structures, high-entropy materials provide a promising route to address these challenges. This review systematically summarizes the electromagnetic-wave absorption behavior and structural evolution of high-entropy alloys, high-entropy ceramics, and high-entropy MAX/MXene materials under extreme conditions such as oxidation (550-1600 °C), salt-spray exposure, cryogenic temperatures, and thermal shock. Particular emphasis is placed on elucidating the mechanisms enabling efficient electromagnetic dissipation, including composition design, microstructural engineering, and multi-mode coupling. Reported studies indicate that these materials can achieve reflection losses below −30 dB and effective bandwidths exceeding 10 GHz across a variety of systems while maintaining excellent environmental stability. Future research opportunities include machine-learning-assisted multi-objective optimization, scalable fabrication strategies, and the development of sustainable high-entropy absorber systems for practical deployment in extreme environments.

Ternary layered material MAX/MAB phases have become a highly promising candidate for fourth-generation nuclear energy systems, combining the excellent properties of metals and ceramics. This paper reviewed the irradiation response and resistance mechanisms of Ti/Cr/Zr/Nb/V/Ta-based MAX phases, doped/entropy-enhancing MAX phases, and MAB phases. The performance differences between the MAX/MAB phases under irradiation with neutrons, heavy ions, self-ions, He ions, protons, or electrons were investigated. Studies have confirmed that they possess high damage tolerance and resistance to amorphization. This is manifested in the following aspects: accommodating point defects through antisite defects and Frenkel defects; resisting amorphization via atomic rearrangement and crystalline transformation; capturing He atoms by the low-bond-energy A-layer and restricting the growth of He bubbles through M-X layers or B layers; inhibiting further diffusion and penetration of energetic particles; and achieving defect annihilation and damage recovery during high-temperature irradiation and annealing processes. Finally, scientific research strategies are proposed, including regulating MAX/MAB phases to achieve optimal entropy values, designing component structures based on electronegativity and lattice distortion, and investigating the synergistic effects of multiple irradiation particles. Additionally, prospects for the further development of MAX/MAB phases in nuclear energy systems are presented.

As a new member of two-dimensional (2D) materials family, 2D transition metal borides (MBenes) have attracted rising attention owing to the remarkable thermodynamic stability, electrical and mechanical properties. Over the past several years, the study of MBenes has been extended from theoretical simulations to experimental applications, stimulated by the increasing synthesis methods of MBenes. However, the recent experimental applications about MBenes have not been comprehensively introduced. This review concentrates on a comprehensive overview of MBenes which have accordion-like structures derived from multilayer MAB phases and their relevant experimental progress. First, the concept of MBenes, development progress, structural, basic properties are introduced. Then synthetic routes for the production of MBens, including alkaline/acid solution, dealloying, molten salt-assisted etching methods are surveyed. Subsequently, the introduction and analysis of the latest applications such as metal-ion batteries, metal-air batteries, photocatalysis, electrochemical catalysis, sensors, environmental technology, magnetism, lubrication are summarized. Finally, perspectives and challenges for MBenes in synthesis and applications are briefly presented.

Cr₂AIC, as a ternary layered MAX phase ceramic with excellent oxidation resistance and ablation resistance, has great potential in thermal protection materials. To further tap its potential as a recyclable thermal protection material in extreme environment, the cyclic ablation performance of Cr₂AIC under nitrogen plasma flame at 1600^∘C was systematically studied in this paper. During the cycles (each lasting three minutes) of ablation, Cr₂AIC maintained structural integrity and exhibited low linear and mass ablation rates. After three cycles of ablation, the linear ablation rate and mass ablation rate were 0.050μ m/s and 0.048mg/s, respectively. The analysis of surface and near-surface components shows that Al₈Cr₅ produced by the decomposition of Cr₂AIC is the origin of the excellent ablation performance of Cr₂AlC ceramics. However, as the cycle time and total ablation time increase, Cr₂AIC and Al₈Cr₅ near the surface will be depleted under high-temperature oxidation, leading to material failure. This study presents the excellent cycling and longterm ablation properties of Cr₂AlC ceramics, revealing their enormous application prospects in reproducible thermal protection materials.